Contents:
What's changed for our standard bed frames
Why storage and ottoman beds are different
We've been sending beds out to customers since 2009, and in that time we've seen just about everything that can happen to a parcel between our door and yours. How a bed is packed decides a lot about the condition it arrives in.
This year, we started testing a new way of packing our standard bed frames. Here’s what we’re trialling, what we’ve learned so far, and why we’ve decided to maintain the current packing process for our storage and ottoman beds.
Why we rely on couriers
Around 99 in every 100 of our beds are delivered by a third-party courier rather than by us. We're a small family-run team, and covering the whole country ourselves within a reasonable delivery time simply isn't possible. We did trial our own deliveries in the past, and it was very difficult to make work. You'll find how delivery works on our delivery information page.
Since 2009 we've worked with a lot of couriers. Each has had its good points and its bad ones, but once a bed leaves us, how it's handled on the way is out of our hands. That's why we've invested so much over the years in getting our packaging right.
What's changed for our standard bed frames
Since April 2026, we've been trialling corrugated cardboard in place of polystyrene to protect the headboard, footboard and side rails on some of our standard bed frames.
Six months in, the results have been encouraging. We still believe polystyrene offers more protection, but we haven't seen a meaningful rise in beds being damaged in transit. That's likely because these frames are lighter than our storage and ottoman beds.
The cost difference between the two is only around £2 per bed, so cost isn't what's driving this decision, the environment is. We think the question is bigger than whether the packaging can be recycled. When a bed arrives damaged, the affected part has to be returned and a replacement delivered. We always make every effort to repair damaged parts wherever possible, with the aim of giving them a second life by selling them as B-grade stock. Unfortunately, this isn't always possible, and many damaged parts are beyond repair and ultimately have to be disposed of. This carries an environmental cost too, and in our opinion, often a greater one than using an appropriate amount of protective polystyrene in the first place.
So we're weighing both sides carefully. We're continuing the trial through our busiest time of year, when couriers are under the most pressure, to see how the cardboard holds up. If it keeps performing as it has so far, we plan to switch all of our standard bed frames to corrugated cardboard protection for new orders placed from 2027.
Corrugated cardboard is fully recyclable, so once we make the switch, the protection inside the box can be recycled along with the box itself.
Why storage and ottoman beds are different
Our storage beds and ottoman beds are heavier pieces of furniture, and in our experience, corrugated cardboard alone doesn't offer the same level of protection against knocks and impacts as polystyrene. With lighter bed frames, the difference in protection often depends on how the product is handled during transit. However, with heavier storage and ottoman beds, that extra protection can make all the difference between a headboard arriving in perfect condition and one arriving damaged.
Many bed companies have moved fully to corrugated cardboard. As we mentioned above, the cost difference is small, and money isn't the reason we've kept polystyrene on these beds.
If you'd like to see how our ottoman beds are put together, we look at the base, the storage and the floor panels in the same on screen, not always the same up close. And if you're still weighing up materials, solid wood vs. upholstered storage beds compares the two.
The choice we made
For us, the priority is making sure your bed arrives in the same condition it left us. That's why we've decided to keep our current packaging method for storage and ottoman beds. We use polystyrene for protection, alongside polythene sheeting that wraps around the bed components much like a blanket, helping to protect them throughout their journey.
We recognise that this means using polystyrene that can't be recycled through normal household collections, but based on our experience, we believe it's the more responsible choice for these heavier beds.
At a glance
| Standard bed frames | Storage and ottoman beds | |
| Protection inside the box | Corrugated cardboard around the headboard, footboard and side rails, being trialled on some models since April 2026. We plan to use it on all standard frames for new orders from 2027. | Includes an appropriate amount of polystyrene that can't be recycled at home |
| Recyclable | The cardboard protection is recyclable | Heavier beds; polystyrene takes knocks better than cardboard |
| Why | Lighter frames; trial results so far show no meaningful rise in transit damage | Heavier beds; polystyrene takes knocks better than cardboard |
Any questions?
If you'd like to know how a particular bed will be packed, or you're not sure what to do with the packaging once it arrives, give us a call on 02393 552 550 or reply to any of our emails. We're always happy to help.
Once your bed is built, our care and cleaning guide covers keeping it looking its best. If you're still choosing, our bed frame buying guide walks through size, style, storage and slats.
Explore our bed frames · Request your free wood samples
Warmest wishes, The Oak Bed Store family
From our family, to yours.